Gå til innhold

SimPad PLUS

Simulering & Trening

SimPad PLUS er en styringsenhet som brukes til å kontrollere Laerdal -treningsdukker og simulatorer. Den kan også brukes sammen med ferdighetstrenere og standariserte pasienter. SimPad PLUS hjelper instruktøren, ny eller erfaren, å levere svært effektiv simuleringsbasert opplæring

Gå til seksjonen

Når simuleringsverktøyene er enkle å bruke, blir undervisningen mer effektiv

Gjennom sitt inuitive brukergrensesnitt, enkle design, brukervennlige scenarier og integrerte datalogg, vil SimPad PLUS hjelpe deg med å enklere oppnå dine læringsmål

Bruk SimPad PLUS til:

En realistisk klinisk opplevelse

Gi en økt klinisk realisme og innby til kritisk tenkning gjennom dynamisk monitorering og pasientinteraksjon

Den valgfrie berøringsskjermen Laerdal Patient Monitor gir konkret klinisk tilbakemelding og simulerer fysiologiske parametere, inkludert HR, EKG, Sp02, BR, RR, temperatur, etC02 og 12 avledning.

Det inkluderte headsettet og mikrofonen gir mulighet for effektiv kommunikasjon med pasienten og øker realismen i simuleringen.

SimPad PLUS sine nøkkelegenskaper

  • Mobil
  • Enkel å sette opp
  • Intuitiv berøringsskjerm
  • Kontroll av pasientens vitale tegn og fysiologiske parametre
  • Lagring av data for debriefing

Arbeid slik det passer deg

Valgfri driftsmodus betyr at SimPad PLUS har to unike måter å kontrollere simuleringstreningen. Instruktøren kan individuelt justere paramenterene for sanntidskontroll eller bruke forhåndsprogrammerte scenarier for å øke standardiseringen.

Manuell betjening

Kjør “on-the-fly” for full kontroll over alle parametere eller bruk temaer for en mer konsistent simuleringsopplevelse. Temaene byr på en rask og enkel måte for å endre pasientens tilstand med et enkelt "tastetrykk".

Automatisk betjening

Benytt forhåndsprogrammerte scenarier for en enkel og effektiv måte å kjøre simuleringer på. De loggførte hendelsene, samt hendelser som oppdages av pasientsimulatoren, kan automatisk drive scenariet fremover

Enkelt å integrere strukturert og selvstyrt læring i læreplanen

It improves their confidence because now they can learn whenever they want and they do it on their own terms.

Cecilie Haraldseid, Lecturer of Nursing Education, University of Stavanger

SimPad PLUS forbedringer

User Experience

Our new hardware gives you a more responsive interface and a shorter boot time, allowing you to get started faster.

Bluetooth connection

Required for the operation of Premature Anne

WiFi Connection

Faster data rates, fewer disconnects, and a more enjoyable user experience with dual-band wireless networking.

Oversikt

Last ned

Bruksanvisninger

pdf

SimPad PLUS Quick Setup Guide Multilanguage (5mb)

pdf

How to Update SimPad and SimPad PLUS Software

This document explains how to update the software on your SimPad and Link Box, including PLUS version.

pdf

SIMPAD PLUS and LINK BOX PLUS Important Product Information (8mb)

pdf

SimPad and SimPad PLUS Combined User Guide - EN (23mb)

Viktig informasjon

pdf

Laerdal Network Requirement Document

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

pdf

Laerdal Network Requirement Document (1mb)

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

Programvare

SimPad Theme Editor

IMPORTANT INFORMATION - This software will only be accessible using Internet Explorer The Theme Editor is an online PC software tool for creating Themes for the SimPad system when operated using the Manual Mode. The program allows you to easily make new Themes with States and Interventions. For offline use: Right click anywere in the web page and select Install SimPad Theme Editor onto this computer...

Session Viewer Downloads

Use this link to download latest software to Session Viewer

SimView Downloads

Use this link to download latest software to SimView

SimView Mobile Downloads

Use this link to download latest software to SimView Mobile

LLEAP and Laerdal Patient Monitor Downloads

spu

SimPad PLUS 6.8.1

Changes in this release: Bugfix Bad Voice Conferencing Audio. BugFix Audio feedback using external microphone to SimJunior manikin . Bugfix SimBaby artificial chestmovement while ventilating. Bugfix SimStart virtual pads not registered. Bugfix SimStart AED not detected on using SimPad BLS Instructor. Bugfix Standarized Patient spins forever.   Changes since 6.8.0: SimPad : SimPad Manual Mode: Shock did not set to the next heart rhythm. Licenses: Possible to remove SimPad licenses. SimPad Classic: Not able to access SimStore on Wifi. Nursing Anne Simulator: Voice conferencing system higher default volume More silent running chest rise SimBaby: Possible for the instructor to trigger intubation event in Manual Mode Added Gallop heart sound when using SimPad Tracheostomy Care: Fixed airway leakage when ventilating while intubated Movement and seizures should halt when session is paused Release button for stomach distension Fixed etCO2 curve on Patient Monitor when ventilating no lung sounds when ventilating SimNewB: Release button for stomach distension SimBaby: Possible for the instructor to trigger intubation event in Manual Mode Other: RA QCPR: Updated Firmware Resuci Junior QCPR: Updated Firmware SimJunior: Release button for stomach distension Sounds Trainer: Possible to adjust sound volume levels Note: Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin. Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

spu

SimPad PLUS 7.3.0

Changes in this release: Bluetooth discovery of simulators. SimPad PLUS to Simulator automatic WiFi settings synchronization. WPA2 Enterprise Wifi network support with username password.     Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 By the end of 2020 new releases of Patient Monitor will no longer support Windows 7   Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin. Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

spu

SimPad PLUS 7.4.5

Changes in this release: Session logfiles on Standardized patient are not stores if user quits session.   Changes from version 7.4.0: Nursing Anne Simulators will have a new option in Session Information to change the default age and gender of the manikin (per now it only affects prerecorded sounds). Age and Gender Setup button is only visible when connected to a Nursing Anne Simulator . Voice Conferencing Application (VCA) improvements. Occasional aliasing on VCA has been improved. Prerecorded sounds will in some cases sound loud through the instructor headset, a button to automatically mute instructor headset when playing prerecorded sounds has been added. Fix Vocal sound on SimMan ALS. Fix flow fraction score for BLS Instructor. Fixed issue with Nursing Anne Simulator, SimNewB and SimBaby where they would sometimes not connect after running first session. Corrected problem where SimPad would sometimes not connect to internet enabled services such as Laerdal Scenario Cloud. Fixed ShockLink update issue where some devices would fail to update to newest version.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 Patient monitor 8.0.0 and newer will not support Windows 7   Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin. Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

spu

SimPad PLUS 8.0.0

Changes in this release: CPR Guidelines 2020 (Changes to ventilation rates for baby and child age groups). SimPad PLUS and LinkBox PLUS will not connect to old LinkBox and SimPad devices. Resuci Anne QCPR firmware version 1.20 with QCPR Guideline 2020. Fixes: BLS instructor would sometime not connect to RAAST manikin. Session logfiles on Standardized patient are not stores if user quits session   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 Patient monitor 8.0.0 and newer will not support Windows 7   Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin. Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

spu

SimPad PLUS 8.0.2

Changes in this release: New BLS manikin firmware, 1.2.1. Support for TruMonitor. BLS competition (Australia). Virtual CPR added. Changes to Session settings, feature is moved. Fix for SimPad failing to upload log file to SimView. . Fixes: Fixes for SimPad PLUS. Occasionally SimPad PLUS has lost its licenses. Pacing on AVB 3 degree has not given heart rate increase. When using 'Evaluate later' screen has jumped out to start page. In BLS mode toggling timeline several times resulted in SimPad restarting. SimView was missing log when using SimPad PLUS. When charging SimPad will now turn of once it is fully charged if not in use. Enabling debrief server when using Standardized Patient.   Changes from version 8.0.0: CPR Guidelines 2020 (Changes to ventilation rates for baby and child age groups). SimPad PLUS and LinkBox PLUS will not connect to old LinkBox and SimPad devices. Resusci Anne QCPR firmware version 1.20 with QCPR Guideline 2020. Fixes: BLS instructor would sometime not connect to RAAST manikin. Session logfiles on Standardized patient are not stores if user quits session   Note: Compatibility with SimPad and LinkBox SimPad PLUS and LinkBox PLUS 8.0.0 and newer is no longer compatible with SimPad and LinkBox. Last software version for SimPad and LinkBox is 7.4.5, and not compatible with 8.0.0 for PLUS. Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 Patient monitor 8.0.0 and newer will not support Windows 7   Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin. Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

Kontakt oss

Ønsker du mer informasjon?

Ønsker du mer informasjon?

Hvordan ønsker du at vi skal kontakte deg?
<p>Vi vil håndtere dine personlige kontaktopplysninger med forsiktighet som beskrevet i <a href="/no/support/customer-service/privacy-policy/" target="_blank">Laerdals personvernerklæring.</a></p>

Vi vil håndtere dine personlige kontaktopplysninger med forsiktighet som beskrevet i Laerdals personvernerklæring.

Retur

Retur

<p>Vi vil håndtere dine personlige kontaktopplysninger med forsiktighet som beskrevet i <a href="/no/support/customer-service/privacy-policy/" target="_blank">Laerdals personvernerklæring.</a></p>

Vi vil håndtere dine personlige kontaktopplysninger med forsiktighet som beskrevet i Laerdals personvernerklæring.

Teknisk support

Teknisk support

<p>Vi vil håndtere dine personlige kontaktopplysninger med forsiktighet som beskrevet i <a href="/no/support/customer-service/privacy-policy/" target="_blank">Laerdals personvernerklæring.</a></p>

Vi vil håndtere dine personlige kontaktopplysninger med forsiktighet som beskrevet i Laerdals personvernerklæring.

SimPad PLUS only

204-30133

SimPad PLUS only

kr 6 473,00

Forventet forsendelsesdato 18/11/2021